Gold Split-Spoke Forged Wheel

Ten slender gold-toned spokes are arranged in five pairs around a plain centre cap. Recessed detailing near the hub adds depth without crowding the face. The original images show a five-hole example from front and elevated angles.

Images are design examples. The illustrated drilling, visible finish and proportions do not confirm every selectable configuration. Use the written selection and confirmed specification for your order.

15 selectable combinations are recorded for this design: Golden, 4 / 5 / 6 holes and 18–22 in diameters. A hole count is not a complete bolt pattern. Width, PCD, offset and centre bore must be specified together for the intended vehicle.

The wider custom ranges below describe project possibilities, not additional ready-to-buy combinations. Different front and rear specifications should be listed separately in a custom enquiry.

Online diameters

18 in / 19 in / 20 in / 21 in / 22 in

Online hole counts

4 / 5 / 6

Selected colour label

Golden

Custom diameter range

15–26 in in the manufacturing information; other sizes require a separate specification and quote.

Listed PCD values

100, 108, 112, 114.3, 115, 120, 127, 130 and 139.7 mm; not a confirmation of a particular hole-count / PCD combination.

Listed offsets

ET 10 / 30 / 50 mm; the order-specific offset must be confirmed.

Centre bore

Custom specification; no fixed centre bore is assigned to the online options.

Width entry

The source width field reads 5.5 without a unit. Confirm the required width; do not treat this as a verified width for every diameter.

The manufacturing information identifies 6061-T6 aluminium alloy and a forged wheel construction. Product condition is listed as new, with origin in Anhui, China. No wheel net weight or numeric load rating is provided for these online combinations; request these for the final specification.

The detailed manufacturing specification describes one-piece construction. Other assembly types are not automatically included in the online combinations and require a separate project review.

Colour and surface finishing can be customized by enquiry. The available colour label above is retained exactly as the ordering option; alternative finishes are not automatically included at the displayed price.

Material

6061-T6 aluminium alloy

Construction

One-piece, as described in the detailed manufacturing specification

Condition

New

Origin

Anhui, China

For a custom quotation, provide the vehicle make and model, wheel diameter, width, bolt pattern (PCD), centre bore (CB) and offset (ET). Include the quantity and any different front / rear requirements. These measurements are more useful than a vehicle name alone.

For custom projects, the manufacturer describes preparing a 3D drawing using the vehicle information and requested wheel data. Appearance and dimensions are reviewed before production. Confirm that this drawing-approval step is included in the quote for your particular custom order.

Specification-based design and finish customization are described for custom projects. Ask for the relevant scope, additional charges and approval steps; an online diameter selection does not itself include a bespoke design service.

The manufacturer illustrates a sequence from wheel blanks and shape milling through drilling, grinding, painting and packing. These process examples explain the production stages without implying that the photographs document this exact finished order.

The manufacturing FAQ states that each wheel is tested before delivery. The source does not supply an order-specific report, numeric load rating or test method for these combinations. Request the relevant inspection documentation for the final specification.

The manufacturing information lists a one-year warranty. Ask for the applicable coverage, exclusions and claim procedure in writing for your order; this reference does not replace the terms agreed with WheelVexa.

The manufacturer illustrates protective wrapping, foam supports around a wheel and individual carton packing. Confirm the protection, carton count and any custom packaging for the final order. The images are packaging examples, not a packing guarantee for every shipment.

Shipping arrangements depend on quantity and destination. Include the delivery country and postcode in your enquiry so that packaging and freight can be checked together. The wheel price does not establish a delivery date or a freight quote.

Selling unit

Single item / one wheel

Included accessory reference

Clips are listed in the product information; confirm the exact contents for your order. Tyres, valves and other fitting parts are not confirmed as included.

The manufacturing FAQ gives an indicative production period of around 15 days for one-piece wheels and 25 days for two-piece projects after the agreed advance payment. The exact time depends on the design and quantity. These are production references, not a confirmed dispatch or arrival date.

The manufacturing FAQ mentions a one-piece minimum, while the displayed factory price tiers start at four pieces. Minimums therefore depend on the order type and specification. WheelVexa prices are per wheel; do not interpret the factory tier as an automatic discount or a four-wheel set. The customization options also list a four-piece minimum; confirm the requirement for the requested changes.

This design is offered on a backorder basis, not as verified ready-to-ship inventory. Confirm fitment, finish, quantity, production timing and delivery arrangements before payment.

Logo and packaging customization are described for OEM and ODM projects. A trade enquiry should separate wheel specifications, required quantities, finish choices, branding artwork, packing requirements and destination. Custom branding or packaging is subject to a separate review and is not included simply by selecting a standard option.

For an individual build, choose the available size and hole count, then use the fitment enquiry when you need specification confirmation. For larger projects, use the dealer enquiry to request an order-specific proposal. The quote should identify the approved design, dimensions, finish, quantity, delivery terms and any sample or drawing approval.