One-piece, two-piece and three-piece forged wheels
One-piece, two-piece and three-piece describe how a wheel is assembled. They do not, by themselves, establish the right size, vehicle compatibility or load rating. Use the assembly information to compare designs, then specify the dimensions and intended use for the exact wheel.
One-piece and monoblock wheels
A one-piece wheel combines the centre and rim in one component. In this catalogue, monoblock is used for that construction. Compare the spoke layout, available diameter choices and the product’s construction notes. A visible deep lip or decorative perimeter detail does not change an assembly into a multi-piece wheel.
Browse one-piece forged wheels.
Two-piece wheels
A two-piece wheel has a separate centre and rim. Joining methods and final dimensions depend on the design. A photographed fastener ring alone is insufficient evidence of the structural assembly. Where the detailed product information identifies two-piece construction, confirm the final drawing and finish arrangement for that configuration.
Browse two-piece forged wheels.
Three-piece wheels
A three-piece wheel uses a centre, an inner rim section and an outer rim section. Specify the finish and dimensions of the complete assembly. Do not assume service procedures, hardware or interchangeable components from another design apply to it.
View the three-piece forged wheel design.
Eight designs: compare the actual catalogue options
The entries below read the current product options directly. They separate selectable diameter and hole count from dimensions that still need a final specification. Hole count is not a complete bolt pattern. Colour names describe menu choices; the product page explains how those choices relate to the photographed finish.
Black and Silver Geometric Forged Wheel
- SKU
- WV-FG-017
- Construction reference
- One-piece
- Selectable diameters
- 18 in | 19 in | 20 in | 21 in | 22 in
- Hole-count options
- 4 | 5
- Colour options
- Silver
Copper Geometric Y-Spoke Monoblock Wheel
- SKU
- WV-FG-061
- Construction reference
- Monoblock
- Selectable diameters
- 15 in | 16 in | 17 in | 18 in | 19 in | 20 in | 21 in | 22 in | 23 in | 24 in
- Hole-count options
- 4 | 5 | 6 | 8
- Colour options
- No colour selector; confirm the final finish separately
Rose Copper Cross-Braced Y-Spoke Monoblock Wheel
- SKU
- WV-FG-069
- Construction reference
- Monoblock
- Selectable diameters
- 17 in | 18 in | 19 in | 20 in | 21 in | 22 in
- Hole-count options
- 4 | 5 | 6 | 8
- Colour options
- Black | Blue | Silver | Golden | Gray | Brown | Chrome
Graphite Eight-Spoke Polished-Lip Forged Wheel
- SKU
- WV-FG-074
- Construction reference
- One-piece
- Selectable diameters
- 15 in | 16 in | 17 in | 18 in | 19 in | 20 in | 21 in | 22 in | 23 in | 24 in
- Hole-count options
- 4 | 5 | 6 | 8
- Colour options
- No colour selector; confirm the final finish separately
Black Branch-Spoke Polished-Lip Forged Wheel
- SKU
- WV-FG-079
- Construction reference
- One-piece
- Selectable diameters
- 15 in | 16 in | 18 in | 19 in | 20 in | 21 in | 22 in | 23 in | 24 in
- Hole-count options
- 4 | 5 | 6 | 8
- Colour options
- No colour selector; confirm the final finish separately
Redline Geometric Five-Spoke Forged Wheel
- SKU
- WV-FG-082
- Construction reference
- Listed as two-piece; confirm the final assembly drawing
- Selectable diameters
- 17 in | 18 in | 19 in | 20 in | 21 in | 22 in
- Hole-count options
- 4 | 5 | 6 | 8
- Colour options
- Black | Blue | Silver | Golden | Gray | Brown | Chrome
Gold-and-Black Deep-Concave Two-Piece Forged Wheel – WV-FG-002
- SKU
- WV-FG-002
- Construction reference
- Two-piece appearance; confirm the final assembly drawing
- Selectable diameters
- 18 in | 19 in | 20 in | 21 in | 22 in
- Hole-count options
- 4 | 5
- Colour options
- Silver
Silver Six-Window Disc Forged Wheel
- SKU
- WV-FG-034
- Construction reference
- Listed in the three-piece category; final piece count requires confirmation
- Selectable diameters
- 18 in | 19 in | 20 in | 21 in | 22 in
- Hole-count options
- 4 | 5
- Colour options
- Silver
Choose by the requirement that matters
- Appearance: compare the original product views and the finish note. Specify the face, lip and hardware appearance separately when relevant.
- Dimensions: write down diameter, width, signed offset, hole count with PCD, and center bore for each axle. Broader manufacturing ranges are not extra combinations in the online selector.
- Engineering: obtain the final assembly drawing, vehicle-specific clearance checks and applicable load or inspection information. No construction type automatically proves that one design is lighter or stronger than another.
- Order scope: prices are per individual wheel. State quantity, destination and requested timing, then confirm the applicable payment, delivery and after-sales terms.
Some product descriptions retain conflicting construction references from the available documentation. Keep that question open until the final assembly is established; do not choose a construction merely from a photograph.
Prepare the specification before ordering
The wheel fitment guide explains the measurements, includes a width/offset comparison and provides a downloadable front/rear worksheet. For a dealer or multi-vehicle project, prepare a separate configuration and quantity for each requirement using the trade project brief.
